Jump to content



Photo

Ikan V-7000 LCD


  • Please log in to reply
4 replies to this topic

#1 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 387 posts
  • Philadelphia, PA

Posted 15 January 2013 - 05:35 PM

This is a cheap little composite LCD. Not the prettiest picture (it wasn't even a very expensive monitor brand new), but it works, and its fine to hand off to someone else. I modded it to take a composite input via an RCA plug right on the monitor, instead of via a proprietary cable (which the previous owner had lost). It's worked well as a directors monitor on a few shoots, but I'm trying to move to an all-HD setup now.

Comes with the fabric pouch you see in the pictures, the ball head mount (which can go on either a 1/4" thread or a hot shoe), and if you need a power adaptor or any other power cable I have the parts to make, I'll throw that in free too.

Best offer takes it. Want it gone in a week or so.

Attached File  ImageUploadedByTapatalk1358289177.799509.jpg   68.92KB   119 downloadsAttached File  ImageUploadedByTapatalk1358289188.490173.jpg   77.91KB   136 downloadsAttached File  ImageUploadedByTapatalk1358289197.457042.jpg   100.15KB   98 downloads
  • 0

#2 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 387 posts
  • Philadelphia, PA

Posted 16 January 2013 - 08:57 PM

How about $60 shipped? Any interest?
  • 0

#3 Osvaldo Silvera SOC

Osvaldo Silvera SOC

    Advanced Member

  • Sustaining Members
  • 675 posts
  • Miami, FL

Posted 16 January 2013 - 11:54 PM

How do you power it? And did you place that RCA where an Antenna went before, on top of the Monitor?
This may work as a top of camera prompter. Thinking...Thinking.....
  • 0

#4 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 387 posts
  • Philadelphia, PA

Posted 17 January 2013 - 12:12 AM

Osvaldo,

Yeah, I put the RCA there. No antenna or tuner on this model, so there was just a black plug where the antenna would go. Used RCA because it wasn't big enough to fit a BNC into.

Power is via a standard 2.1mm consumer DC power jack on the side. I've got a ton of those cables lying around.

Might work well as a camera top prompter. Weighs almost nothing - according to Ikan, weighs just over 1 pound.
  • 0

#5 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 387 posts
  • Philadelphia, PA

Posted 17 January 2013 - 06:18 PM

Sold. Thanks!
  • 0




Wireless Video Systems

The Moses Pole - Steadicam Monopod

Paralinx LLC

Engineered Cinema Solutions

Boland Communications

Betz Tools for Stabilizers

Varizoom Follow Focus

rebotnix Technologies

Omnishot Systems

BOXX

GPI Pro Systems

Media Blackout - Custom Cables and AKS

PLC Electronics Solutions

PLC - Bartech

Ritter Battery