This is a provid 2 sled that was upgraded for hd. The lower was modified so the monitor
and battery are both completely adjustable. You can run just about any AB battery and get good balance.
It was also designed so it is fairly easy for anyone to take apart the post and replace the video and power
cables if ever needed. There is a power distro box under the AB mount that provides 15v, 12v, 7.2v, and 5v that
can be sent up the post for different power requirements.
The Marshall monitor can handle just about any signal, I usually used it with HD/SDI, and the
marshall level monitor on screen works great.
Heres whats included:
Interactive 2000 duel charger, a bit ugly but works great
2 - Anton Bauer 140 Hytron batteries, hold a good charge..not sure on cycles..
- on one battery the case is a little loose, so I have tape around it so ensure it doesnt rattle
Tiffen Iso-elastic SK2 arm and bag. Arm is in excellent condition.. I have had this sled, a canon xlh1, and both
AB 140's mounted (putting the sled weight at about 30lbs) and the arm handled it surprising well, with some
addl weight adjustment still on the arm. It is not rated for that weight though...
Tiffen ProVid2 Vest- excellent condition
Tiffen docking bracket- excellent condition
Tiffen provid2 hybrid sled - very good condition
anton bauer battery mount
Marshall V-LCD70xb-3GSDI monitor with 120 and 12 power cables-Like new, one small dot on the screen,
which is not visable when monitor is on.- excellent condition
Marshall Hood (never used)
Marshall V-LCD-HI level meter-works great
5- BNC cables
1-Upper power cable
2-lower power cables
3-sets extra of aluminum rods
2-sets extra carbon fiber rods
4-bnc to rca adapters
misc bnc adapters
misc hardware and plates
If you are local you are welcome to come look at the system.
If you want the unit without the monitor or batteries, I can adjust the price accordingly.
Message me if you have any questions or need aditional pictures.