Jump to content



Photo

Cinetronic Monitor Yoke and Marshall 6.5" monitor


  • Please log in to reply
4 replies to this topic

#1 Michael Wilson

Michael Wilson

    Advanced Member

  • Sustaining Members
  • 181 posts

Posted 31 October 2012 - 07:29 PM

I picked up a cinetronic yoke. I have a marshall vlcd 6.5" monitor. Their is considerable space between the edge of the monitor and yoke. I need to get a small bracket that fits on the sides of the monitor and bridges that gap and accepts the yoke's screws on the sides. Can anybody point me to someone in LA who could help me out with this?
  • 0

#2 Michael Wilson

Michael Wilson

    Advanced Member

  • Sustaining Members
  • 181 posts

Posted 31 October 2012 - 08:36 PM

Problem Solved
  • 0

#3 Victor Lazaro

Victor Lazaro

    Advanced Member

  • Sustaining Members
  • 1231 posts
  • Sunnyside Queens, NY

Posted 04 November 2012 - 03:37 PM

How did you solved this?
  • 0

#4 Chris Callarman

Chris Callarman

    Advanced Member

  • Members
  • PipPipPip
  • 64 posts

Posted 04 November 2012 - 10:17 PM

Any chance you can post a picture of your solution.

By the way, how much did the yoke cost?
  • 0

#5 Michael Wilson

Michael Wilson

    Advanced Member

  • Sustaining Members
  • 181 posts

Posted 07 November 2012 - 03:54 PM

I had two delron spacers put on either side of the monitor that tied into the monitor screw holes to fill the gap. Mike Skipps did an amazing job constructing those. Highly recommended. The yoke is pretty big actually. Seems more ideal to cut the yoke down to size. I'll post a pic later. The yoke cost $265.
  • 0




PLC - Bartech

Wireless Video Systems

rebotnix Technologies

Engineered Cinema Solutions

Varizoom Follow Focus

Teradek

GPI Pro Systems

BOXX

SkyDreams

IDX

Boland Communications

Omnishot Systems

Betz Tools for Stabilizers

Paralinx LLC

PLC Electronics Solutions

Ritter Battery

Media Blackout - Custom Cables and AKS