Jump to content


Scorpio Remote Focus System

  • Please log in to reply
No replies to this topic

#1 Stewart Whelan

Stewart Whelan

    New Member

  • Sustaining Members
  • 1 posts
  • Vancouver, Canada

Posted 06 October 2012 - 05:11 PM

Scorpio Remote focus system for sale.
Recently upgraded with new radio card and firmware Ver. 5.30
Every Bracket and cable configuration imaginable.

Hand unit
2 Preston antennas
3 Digital motors
5 Motor brackets
19 Focus rings

4 Motor cables including right angle –green
1 Preston/Scorpio motor cable
2 x 10’ Pana cable XLR with Scorpio camera switcher (Lemo/Fisher)
2 Pana power (Large fitting) to 2 pin lemo cable (very short cable)
2 Pana command (on/off) driver cable
3x 3 pin Donkey box power (11/30vdc) to 24V Pana Lemo

1 Panavision focus gear
1 48 pitch gear (Panavision Zoom)
1 64 pitch gear (Panavision Iris)
Hex screws
Kip screws

12 Sony Lithium Hand unit batteries
2 Sony Lithium Hand unit battery charger with cable
3 Arri bushings (blue)
6 Panavision bushings (brass)

1x .89mm Allen key for scorpio motor
1 Panavision motor focus bracket -(slides into Front body focus mount)
1 Donkey box/shoe bracket -(slides onto lens light bracket)
1 Support rod motor bracket -(slides onto Pana zoom rod bracket)
1 silver 2 ½” 15mm rod
1 silver 3 ¼” 15mm rod
1 silver 4” 15mm with 3/8 – 16 threaded stud rod
2x 2” Blk female/female
1x 2” 90* offset female/female

2x 3 pin Fisher to Arri 3 pin R.S. power cable (on board 11/30 vdc) -yellow
1 Hand set to Donkey box cable “0” setting –red/white
2x 4 pin XLR to Donkey box power cable (11/30 vdc) –brown
1 Arri control cable BL-IV SRII Arri III
2 Arri 535/435/SR3 Command cables (camera run on/off) –blue
1 Handset power cable to 4 pin block battery
2 Scorpio power 12v
2 Arri run/stop

Digital Cameras
2 x RED Epic start/stop
2 x Sony F900/ F35 Start/Stop

Motion Generator
o Encoder with locking arm and maffer clamp assembly (cable end attaches to Scorpio MDR)
o 24ft Kevlar belt (runs along dolly track)
o 2 modified maffer clamps (for the Kevlar belt)
o 2nd full size pelican case

A great value at nearly half the original cost, with thousands of dollars worth of cables and specialized machined brackets.
Asking $18,000 Contact stewartwhelan@mac.com
  • 0

Betz Tools for Stabilizers


Media Blackout - Custom Cables and AKS

Boland Communications

Paralinx LLC

PLC Electronics Solutions

Ritter Battery

GPI Pro Systems

PLC - Bartech

Omnishot Systems

The Moses Pole - Steadicam Monopod

Engineered Cinema Solutions

Wireless Video Systems

rebotnix Technologies

Varizoom Follow Focus