Jump to content



Photo

Bracket needed to mount new transvideo evolution


  • Please log in to reply
5 replies to this topic

#1 Dan Erbeck

Dan Erbeck

    Advanced Member

  • Sustaining Members
  • 63 posts
  • Northern New Jersey

Posted 08 September 2012 - 07:34 AM

I just recieved the new transvideo evolution 8" cinemonitor. I'm trying to mount it to my clippers 312 existing monitor bracket where I originally had a 7" tv logic HD monitor.
I also ordered the yoke bracket adaptor with the monitor which I thought would work. After installing the adaptor it turns out the transvideo monitor is now to wide to fit between the U-shaped bracket. It seems i ordered the wrong adaptor. Can anyone tell me the right one to order or what they did. Transvideo sells a Yoke with bridge 89/16 for the monitor. 89mm being the space between the rods and 16mm being the rod size. Is this what I would need? I plan on calling transvideo on Monday but would like to have a little head start on it through the forum. Any advice would help. Thanks
  • 0

#2 Jacques Delacoux

Jacques Delacoux

    New Member

  • Members
  • Pip
  • 6 posts

Posted 08 September 2012 - 11:33 PM

Hi Dan,
Please tell me what is the distance beetween your two rods.
And confirm you have 16mm diameter rods.
A picture might help.
Best regards
Jacques
  • 0

#3 Dan Erbeck

Dan Erbeck

    Advanced Member

  • Sustaining Members
  • 63 posts
  • Northern New Jersey

Posted 09 September 2012 - 01:05 PM

Hi Jacques

Thanks for the reply. Im not near my rig right now so getting the measurement will be tough. Here are some pictures though of the actual bracket. Maybe this will help.

Thanks again

Dan


Attached File  photo1.JPG   657.04KB   82 downloads
  • 0

#4 Rob Vuona SOC

Rob Vuona SOC

    Advanced Member

  • Sustaining Members
  • 1143 posts
  • Los Angeles

Posted 09 September 2012 - 07:09 PM

Give Tiffene a call, they have a bracket for that monitor with the proper spacers for the width of the U bracket
  • 0

#5 Dan Erbeck

Dan Erbeck

    Advanced Member

  • Sustaining Members
  • 63 posts
  • Northern New Jersey

Posted 10 September 2012 - 08:20 AM

Great thanks Rob!
  • 0

#6 Matthias Biber

Matthias Biber

    Advanced Member

  • Sustaining Members
  • 68 posts

Posted 17 August 2013 - 03:06 PM

the Quattro Monitor Arm from http://cam-jam.de mounts that monitor to any rig


  • 0




Omnishot Systems

Engineered Cinema Solutions

Betz Tools for Stabilizers

Paralinx LLC

PLC - Bartech

Boland Communications

SkyDreams

Media Blackout - Custom Cables and AKS

rebotnix Technologies

IDX

Varizoom Follow Focus

BOXX

Wireless Video Systems

Ritter Battery

PLC Electronics Solutions

GPI Pro Systems

Teradek