Jump to content


XCS PDL to PRO Mount

  • Please log in to reply
No replies to this topic

#1 Afton Grant

Afton Grant

    Advanced Member

  • Moderators
  • PipPipPip
  • 906 posts
  • New York, Boston

Posted 26 August 2012 - 09:00 AM

With the new PRO Generation 3, and now 4 battery hangers, the former disk mounts that secured our PDLs to the Generation 2 hangers no longer worked. You could use Velcro which isn't very stable. You could tap new holes into your Lower J Box, requiring proper tools and precision. Or you could use just one screw into the existing hanger mounting holes, but the PDL can rotate, and also hang too low for the new Generation 4 base.

I set out to find a solution and came up with this bracket. It's simple, it fits onto the rig without any modifications. It works with both the Gen 3 and Gen 4 bases (probably the Gen 2 as well, though I haven't actually tested that). It is made to work on either side of the rig. It is 3/16" thick, and provides enough clearance for a recorder mount (as seen in the pictures).

I had many made. If anyone would like one, please see my post in the marketplace.


Attached File  Photo Aug 26, 9 07 22 AM.jpg   142.01KB   121 downloads Attached File  Photo Aug 26, 9 09 21 AM.jpg   152.57KB   154 downloads Attached File  Photo Aug 26, 9 08 23 AM.jpg   135.83KB   154 downloads Attached File  Photo Aug 26, 9 10 03 AM.jpg   165.3KB   115 downloads
  • 0


Wireless Video Systems


Omnishot Systems

PLC Electronics Solutions

Boland Communications

Betz Tools for Stabilizers

PLC - Bartech

rebotnix Technologies

Ritter Battery

Varizoom Follow Focus

GPI Pro Systems


Camera Motion Research

Paralinx LLC