Jump to content



Photo

Masters/Ultra parts


  • Please log in to reply
4 replies to this topic

#1 Daniel Stilling DFF

Daniel Stilling DFF

    Advanced Member

  • Sustaining Members
  • 258 posts
  • Florida

Posted 07 June 2012 - 08:04 PM

This evening I took on the task of disassembling my arm (not sure if its a Masters or an Ultra, how can I tell?), and doing a thorough cleaning. I discovered one of the bearings was completely mangled, and one of the cables that links the springs could use a replacement.
Does Tiffen carry these parts? if not, does anyone have good ideas where to get them?
  • 0

#2 Alfeo Dixon SOC

Alfeo Dixon SOC

    Advanced Member

  • Sustaining Members
  • 756 posts
  • Atlanta

Posted 07 June 2012 - 09:22 PM

This evening I took on the task of disassembling my arm (not sure if its a Masters or an Ultra, how can I tell?), and doing a thorough cleaning. I discovered one of the bearings was completely mangled, and one of the cables that links the springs could use a replacement.
Does Tiffen carry these parts? if not, does anyone have good ideas where to get them?

dont quote me, but I don't think there was an Ultra 1 series arm... only the Master Arm. Could be VERY wrong about that because the Ultra I use to fly was one of the prototypes and had a Master's Arm
  • 0

#3 Brian Freesh

Brian Freesh

    Advanced Member

  • Sustaining Members
  • 922 posts
  • Los Angeles, CA

Posted 07 June 2012 - 10:25 PM

Ultra shipped with the Master Arm. The last few Ultras shipped with G-70s.

Tiffen still services the Master Arm.
  • 0

#4 joe mcnally

joe mcnally

    Advanced Member

  • Sustaining Members
  • 207 posts

Posted 08 June 2012 - 07:19 AM

Hey fellas
my Ultra arm is seems to be mostly a Master series arm but... It has a titanium block to marry with the socket on the vest. It is also tools free for side to side adjustment, two knurled thumb screws. Hope that helps all best joe
  • 0

#5 nick franco

nick franco

    Advanced Member

  • Sustaining Members
  • 258 posts
  • San Fernando, CA

Posted 08 June 2012 - 08:48 AM

Contact Robert Luna, the arm guru (323)938-5659.
  • 0




Ritter Battery

PLC - Bartech

IDX

Paralinx LLC

Wireless Video Systems

Betz Tools for Stabilizers

Media Blackout - Custom Cables and AKS

rebotnix Technologies

SkyDreams

GPI Pro Systems

Omnishot Systems

Varizoom Follow Focus

PLC Electronics Solutions

Teradek

Boland Communications

Engineered Cinema Solutions

BOXX