Jump to content



Photo

Complete package for sale


  • Please log in to reply
16 replies to this topic

#1 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 11 May 2012 - 07:57 PM

Full starter package ready to work on all sized digital and film camera's

SLED: PRO I
GPI PRO Donkey Box 2
GPI PRO J Box
GPI PRO Centerpost (updated for bayonet mounts, removable NON digital cable)
GPI PRO Battery Module 1 ( modified with two AntonBauer gold plates to allow Digital camera's to be powered by Anton Bauer HC's instead of PRO1 batt's )
MK-V Genesis Gimbal
TB-6 monitor
XCS dual rod arm.
Docking collar X 2
Gimbal Wrench
5/32 T-Wrench
3/16 T-Wrench
¼ T-Wrench
7” Compact/Panaflex Dovetail Plate
9” Compact/Panaflex Dovetail Plate
9” Arri/Panaflex Dovetail Plate
Assorted power cables
1- Panavision camera power
1- Panavision Alt camera power
1- Arri 12v camera power
1- Arri HRS camera power
1- Red camera power
1- Moviecam camera power

REMOTE FOCUS - Bartec
2- BFD focus systems (4- cables, Extra antenna, marking strips and marking dial discs)
1- M-One motor (all pitch wheels, mounting bracket, 2- motor cables)
2- FMG.6 motors (all pitch wheels, mounting bracket, 3- motor cables)
2- BFD mounting brackets
BFD power -to- AB powertap
BFD power -to- XLR power
Bartec to Bartec mounting bracket/ power cables

ARM
3A Arm w/ gold springs/ Luna upgrades
4” Arm Post
6” Arm Post
10” Arm Post
D Bracket for low mode
Arm Post Clamps x
Soft Arm Storage Pouch

VEST
CP model 2 - Reconditioned Greg Smith vest
Pads barely used, includes additional original white plastic back piece.
Steel socket block
( barely used PRO vest could be included for Up Charge )

BATTERYS AND CHARGERS
8 - NICAD "choc Bars"
6 - NiMh "choc Bars"
6 - AB Hytron 50
1 - AntonBauer 2701 Dual Charger (current firmware)
1 - PAG charger AR-124
1 - PAG charger MC-124
1 - PAG Pulsar charger
1 PAG charger AR - 304

VIDEO
Coss Single channel Video Xmitter (plus cables for pro and
12 pin Fischer for Arri 12v )
Sony NTSC/ CATV Receiver
Custom Interface Ultra Antenna
Action B/W 5"TV

ACCESSORIES
Anvil and Pelican cases for shipping
Hard mount kit (with socket block)
Docking Bracket With Junior combo stand - locking wheels
Practice cage
Magliner JR with big wheel conversion and top shelf
Assorted BNC cables and connectors
Assorted wrenches
Small sandbag
Steadicam stand w/wheels (second stand)


PRICE $ 36 500

Matthew
dingo_ugly@yahoo.com

Steadicam equipment has been well cared for.
More photo's upon request.
Located in Los Angeles.
Not willing to part out until base package sells

Attached Files


  • 0

#2 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 12 May 2012 - 11:15 AM

In response to some queries

The PRO 1 battery base is fully functional.
Both a film camera and a digital camera can be run using the "choc bar" batt's.
I added the AB gold mounts after a genesis job where I was only getting 7/8 minutes of record time before having the change out batts. With two Dionic HC's record time was over 50 minutes, much better when the DP wants the rig locked off on a stand so they can light thru it.
When running HC's to power a red you can also use the "choc" batts to hot swap the camera and avoid the 90 second reboot.


The vest is fully adjustable but I would guess it is NOT a compact sized vest. I'm 5'9" 160lbs and I only briefly used it while awaiting my back mounted vest.


I'm not looking to break up the Bartec package at this point.


The arm is in very good condition.


MK-V gimbal is smooth and clean.

Also included
2- Base plate rods
1- Pana-bone
  • 0

#3 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 19 May 2012 - 01:36 PM

Yes I would be willing to remove pieces from the package to lower the purchase price.
  • 0

#4 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 26 May 2012 - 11:58 AM

follow focus kit

Attached Files


  • 0

#5 Michael Langford

Michael Langford

    New Member

  • Sustaining Members
  • 4 posts

Posted 26 May 2012 - 08:31 PM

would you be willing to let go of one follow focus unit?

if so how much?

mike
  • 0

#6 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 28 May 2012 - 01:45 PM

would you be willing to let go of one follow focus unit?
if so how much?

mike



sent you a PM
  • 0

#7 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 03 June 2012 - 09:53 PM

the PRO vest that could be added

Attached Files


  • 0

#8 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 04 June 2012 - 11:15 PM

For those who are not partial to green screens the rig could sell with a MK-V Hummingbird SD color monitor if that was preferred.

Attached Files


  • 0

#9 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 09 June 2012 - 06:43 PM

magliner JR with big wheel conversion

Attached Files


  • 0

#10 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 18 June 2012 - 10:58 AM

lots of interest in Bartec's - I'm open to the idea of lowering the purchase price of the package by removing one or both of the Bartec systems.
To clarrify - I'm not selling them piece meal until after the package sells.
  • 0

#11 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 21 June 2012 - 12:48 PM

Package under offer - sale pending .
I'm open to offers for the package, with or with out the PRO vest.
If you are on the fence now is the time to speak up.
  • 0

#12 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 25 June 2012 - 03:19 PM

PRO vest - SOLD - No longer an option in package deal.
  • 0

#13 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 03 July 2012 - 04:46 PM

Sale seems to have fallen thru - open to selling Bartech - one or both
  • 0

#14 Michael Langford

Michael Langford

    New Member

  • Sustaining Members
  • 4 posts

Posted 06 July 2012 - 02:17 PM

Hey Matt


sent you a PM
  • 0

#15 matthew pearce

matthew pearce

    Advanced Member

  • Sustaining Members
  • 85 posts
  • Los Angeles

Posted 06 July 2012 - 04:52 PM

Looks like this Package will now be available with a Basic Bartech / M-one follow Focus system...... and Priced cheaper.

$31 500,
or
$31 000 with out the Magliner

cheers

Attached Files


  • 0




Media Blackout - Custom Cables and AKS

IDX

Engineered Cinema Solutions

PLC Electronics Solutions

Varizoom Follow Focus

PLC - Bartech

Omnishot Systems

rebotnix Technologies

SkyDreams

Wireless Video Systems

Paralinx LLC

GPI Pro Systems

Ritter Battery

Teradek

Boland Communications

BOXX

Betz Tools for Stabilizers