Jump to content



Photo

12" Steadicam Plate updated


  • Please log in to reply
3 replies to this topic

#1 chris bangma

chris bangma

    Advanced Member

  • Sustaining Members
  • 316 posts

Posted 27 April 2012 - 11:09 AM

As per Osvaldo's suggestion, we have updated our 12" Steadicam plate to include iris rod holes on both the front and back of the plate. This will allow transmitters and other accessories to be mounted at the back of the plate as well. The plate is available at www.film-stuff.com
Attached File  IMG_0351.JPG   50.72KB   168 downloads
  • 0

#2 Osvaldo Silvera SOC

Osvaldo Silvera SOC

    Advanced Member

  • Sustaining Members
  • 674 posts
  • Miami, FL

Posted 28 April 2012 - 08:34 PM

SWEET!!!!!. Ordering......
  • 0

#3 thomas-english

thomas-english

    Advanced Member

  • Sustaining Members
  • 1165 posts
  • UK

Posted 29 April 2012 - 09:23 AM

Dear Osvaldo,

Would you use that as your standard everyday plate or only in emergencies?
  • 0

#4 Osvaldo Silvera SOC

Osvaldo Silvera SOC

    Advanced Member

  • Sustaining Members
  • 674 posts
  • Miami, FL

Posted 29 April 2012 - 10:19 PM

Hi Thomas,
I would use this plate on jobs with small box type cameras, where I can just add iris rods to the rear of the plate and mount an AB plate on the back, etc.., I like to spread the weight front to back, instead of stacking.
On a live show I work on, I'd attach the small box camera on the plate, then the wireless Transmitter/receiver on rear facing rods.
Ozzie
  • 0




GPI Pro Systems

Wireless Video Systems

rebotnix Technologies

Omnishot Systems

Engineered Cinema Solutions

Ritter Battery

PLC - Bartech

Boland Communications

BOXX

Betz Tools for Stabilizers

SkyDreams

Teradek

PLC Electronics Solutions

IDX

Varizoom Follow Focus

Media Blackout - Custom Cables and AKS

Paralinx LLC