Jump to content



Photo

Scorpio Remote Focus System


  • Please log in to reply
2 replies to this topic

#1 Stewart Whelan

Stewart Whelan

    New Member

  • Sustaining Members
  • 1 posts
  • Vancouver, Canada

Posted 17 April 2012 - 06:06 PM

Scorpio Remote focus system for sale.
Recently upgraded with new radio card and firmware Ver. 5.30
Every Bracket and cable configuration imaginable.


Hand unit
MDR
2 Preston antennas
3 Digital motors
5 Motor brackets
19 Focus rings

Panavision
4 Motor cables including right angle –green
1 Preston/Scorpio motor cable
2 x 10’ Pana cable XLR with Scorpio camera switcher (Lemo/Fisher)
2 Pana power (Large fitting) to 2 pin lemo cable (very short cable)
2 Pana command (on/off) driver cable
3x 3 pin Donkey box power (11/30vdc) to 24V Pana Lemo

1 Panavision focus gear
1 48 pitch gear (Panavision Zoom)
1 64 pitch gear (Panavision Iris)
Hex screws
Kip screws

12 Sony Lithium Hand unit batteries
2 Sony Lithium Hand unit battery charger with cable
3 Arri bushings (blue)
6 Panavision bushings (brass)

1x .89mm Allen key for scorpio motor
1 Panavision motor focus bracket -(slides into Front body focus mount)
1 Donkey box/shoe bracket -(slides onto lens light bracket)
1 Support rod motor bracket -(slides onto Pana zoom rod bracket)
1 silver 2 ½” 15mm rod
1 silver 3 ¼” 15mm rod
1 silver 4” 15mm with 3/8 – 16 threaded stud rod
2x 2” Blk female/female
1x 2” 90* offset female/female


Arri
2x 3 pin Fisher to Arri 3 pin R.S. power cable (on board 11/30 vdc) -yellow
1 Hand set to Donkey box cable “0” setting –red/white
2x 4 pin XLR to Donkey box power cable (11/30 vdc) –brown
1 Arri control cable BL-IV SRII Arri III
2 Arri 535/435/SR3 Command cables (camera run on/off) –blue
1 Handset power cable to 4 pin block battery
2 Scorpio power 12v
2 Arri run/stop

Digital Cameras
2 x RED Epic start/stop
2 x Sony F900/ F35 Start/Stop

Motion Generator
Includes:
o Encoder with locking arm and maffer clamp assembly (cable end attaches to Scorpio MDR)
o 24ft Kevlar belt (runs along dolly track)
o 2 modified maffer clamps (for the Kevlar belt)
o 2nd full size pelican case

A great value at nearly half the original cost, with thousands of dollars worth of cables and specialized machined brackets.
Asking $18,000 Contact stewartwhelan@mac.com

Attached Files


  • 0

#2 Brice Reid

Brice Reid

    New Member

  • Sustaining Members
  • 3 posts
  • Los Angeles, Ca

Posted 18 April 2012 - 11:27 AM

would you sell some of your brackets separate?
  • 0

#3 Stewart Whelan

Stewart Whelan

    New Member

  • Sustaining Members
  • 1 posts
  • Vancouver, Canada

Posted 23 April 2012 - 09:10 AM

would you sell some of your brackets separate?

Hi Brad,

Sorry no, I want to sell it as a complete kit.

Stewart
  • 0




Media Blackout - Custom Cables and AKS

PLC Electronics Solutions

Wireless Video Systems

Betz Tools for Stabilizers

Boland Communications

rebotnix Technologies

GPI Pro Systems

Engineered Cinema Solutions

Ritter Battery

Paralinx LLC

Omnishot Systems

Varizoom Follow Focus

BOXX

The Moses Pole - Steadicam Monopod

PLC - Bartech