Power/Video monitor cable 8pin lemo to 6pin Hirose pinout info.
Posted 05 April 2012 - 04:49 AM
I am trying to find the correct pinout information for my power/video monitor cable.
I have a Marell green screen with 8pin Lemo connector and a 6 pin Hirose connector on my EFP rig.
My rig is upgraded by MKV and the previous owner told me that the 6 Pin hirose connector on my rig has been re wired for a MKV cable. He couldn't provide me with the pin-out info for the 6 pin hirose connector, I emailed MKV but didn't receive a reply.
Is there anyone that might know what the pin outs will be for the 6 pin hirose if the connector was re wired for a MKV cable?
Any info will be much appreciate it.
Cape Town, South Africa.
Posted 05 April 2012 - 08:07 AM
Post a picture and I will tell you.
I have an MK-V sled so it will probably be the same as mine but a picture would made it 100% sure.
- Haris -
Posted 06 April 2012 - 02:48 AM
Thanks for helping me out with this.
Can I perhaps email you a picture of the connector?
I can't seem to upload the image to this post.
Posted 06 April 2012 - 11:45 AM