Jump to content



Photo

Archer 1 video wiring


  • Please log in to reply
1 reply to this topic

#1 Andy Nicholls

Andy Nicholls

    New Member

  • Members
  • Pip
  • 7 posts

Posted 27 March 2012 - 02:29 AM

Does anyone know if there are any electronics in line from the top video connector to the bottom video connector on an Archer 1 sled or if, as has been suggested by someone at Tiffen, it is a straight through cable?

I ask because I recently had to feed HD-SDI from top to bottom into a Decimator to feed the standard monitor, I had to power the Decimator from the bottom battery D-Tap in this case so couldn't top mount it as usual. While this worked OK for a few seconds it kept cutting out and losing the image. In the end I just ran a long cable down the post and fed the Decimator directly and it all worked fine. I was just wondering what might be causing it to cut out, the video line normally works OK so I don't suspect poor connections in this case. Maybe the internal cabling just isn't up to HD-SDI?
  • 0

#2 RobinThwaites

RobinThwaites

    Advanced Member

  • Members
  • PipPipPip
  • 383 posts
  • Pinewood UK

Posted 27 March 2012 - 03:46 AM

Hi Andy

Phone me.

Robin
  • 0




Wireless Video Systems

BOXX

Media Blackout - Custom Cables and AKS

PLC - Bartech

Paralinx LLC

Engineered Cinema Solutions

Varizoom Follow Focus

Betz Tools for Stabilizers

SkyDreams

Omnishot Systems

Boland Communications

rebotnix Technologies

IDX

Teradek

GPI Pro Systems

Ritter Battery

PLC Electronics Solutions