Jump to content



  • Please log in to reply
No replies to this topic

#1 Kyle Young

Kyle Young

    New Member

  • Sustaining Members
  • 4 posts
  • Los Angeles, CA USA

Posted 13 December 2011 - 01:28 PM

GODD UNTIL CHRISTMAS, Holiday Special- choose between a new Luna Arm for this package or a newly rebuilt Masters arm with new bearings and his new springs by Robert Luna for the same price.

I will sell the package any way you want; no vest, no arm, no monitor, your choice!

This EFP HD package is good because it includes everything you need to start operating except batteries. The sled is 12/24 volt capable, uses the same camera power connector as Tiffen so you can just buy their camera cables when needed or have them made by an independent with the schematics I include. It is all new materials except the gimbal which I have tested and rebuilt with new bearings. It has a dual battery mount for IDX batteries, the battery module is tapped for Anton Bauer battery plates aswell if you choose to change them. Includes 2x Pelican 1650 cases that everything fits in, one with custom cut foam for sled. INCLUDED IN PACKAGE FOR $22,500: Folding Allen wrench set T-Allen wrenches screwdriver 2 sets of mounting screws 2x short BNC cables Marshall Daybright 6.5" HD LCD Monitor, the best HD monitor for viewing at high noon sunlight as proven at a Steadicam monitor shootout attended by 8 manufacturers. 3x HD BNC lines running direct from upper to lower junction boxes multiple NTSC standard def BNC connectors in a wiring diagram supported by a powered VDA(video distribution amp).
LCD power/video cable docking bracket camera dovetail plate upper and lower junction boxes dual posts are carbon fiber
dual video system, 3x direct HD lines and a network of NTSC standard def using a video distribution amp. Today you need both!
New Partial leather vest kinda like a cross between an EFP vest and a Master Series vest with steel socket block. New Luna arm with padded bag. If you are not familiar with the Luna arm, they are made by Robert Luna who used to work for Cinema Products( the original Steadicam manufacturer), they closed their doors in 2000. I worked for them 1 year and an internship before that. Robert knows more about arms than anyone and when he lost his job he decided to manufacture the 3A/EFP arm but added upgrades where he always thought they should be and also used his own version of the springs that allow you to have a weight range of 15-70 pounds. All the used efp and 3a arms have 5 different springs that are not easily changed by the consumer so whatever spring you buy with an old arm you are stuck with. You can change springs but I would never attempt it myself. His arm sells for $10,000 complete. I included it in my packages. The only arm that can do the same weight range are the Silver Spring arm by Steadyrig in Australia that sells for I think $13,000 and the Tiffen Steadicam g-70 arm that sells for I think $17,000. If this is your first rig or you are just concerned about keeping costs low I would consider this package. Buying a used EFP that needs things fixed here or there, rewired for 24 volt, replacing the gimbal for a heavier one, having to rent an arm for very light cameras or very heavy ones can end up costing more than what I'm selling my packages for. My current package is $22,500 plus shipping, it had been selling for $25,000 but with this economy I decided to reduce the price and delete all the camera cables as many customers opted not to get them anyway. Most customers tell me they are only needing 2 cables anyway, the RED cable and the general 12 volt XLR cable typical of the Betacam. It has the same power connector as Tiffen Steadicam uses and you can just buy all your cables from them if you want. The package does come with the 6-day workshop manual, EFP manual, Master Series manual, pin-out diagrams of each connector and schematics of all camera power cables except the RED if you want to make your own. I will include a half day 4 hour crash course on balancing the sled and operating if you want. You must supply camera. These sleds are custom hand built here in Los Angeles one at a time. Please call me with any questions. cell 818-795-4433

steadiapolis@hotmail.com 818-795-4433
Kyle Young Los Angeles, CA USA

Email me for pictures. I can't figure out how to make them small enough for the forum.
  • 0

Varizoom Follow Focus

Omnishot Systems

PLC - Bartech

The Moses Pole - Steadicam Monopod

PLC Electronics Solutions


Media Blackout - Custom Cables and AKS

Boland Communications

Wireless Video Systems

GPI Pro Systems

Engineered Cinema Solutions

Ritter Battery

Betz Tools for Stabilizers

rebotnix Technologies

Paralinx LLC