Jump to content



Photo

Heden M28VT Zoom motor $600 - O.B.O.


  • Please log in to reply
4 replies to this topic

#1 Jeff McPhee

Jeff McPhee

    New Member

  • Sustaining Members
  • 0 posts

Posted 13 July 2011 - 05:05 PM

Attached File  Heden.jpg   69.15KB   89 downloadsI bought this Heden motor several years ago on EBAY thinking I could use this on a Bartech follow focus system I purchased, and then found it was not compatible. I have never used this motor but it seems in good shape, motor turn very smooth and almost no noise. Come with the different rail spacers pictured and a 0.8 pitch gear. I will give a three day return on this from time of shipping arrival.
  • 0

#2 John atkinson

John atkinson

    Advanced Member

  • Sustaining Members
  • 145 posts
  • Florida

Posted 13 July 2011 - 08:25 PM

Attached File  Heden.jpg   69.15KB   89 downloadsI bought this Heden motor several years ago on EBAY thinking I could use this on a Bartech follow focus system I purchased, and then found it was not compatible. I have never used this motor but it seems in good shape, motor turn very smooth and almost no noise. Come with the different rail spacers pictured and a 0.8 pitch gear. I will give a three day return on this from time of shipping arrival.


Is this STD 4-pin lemo. How would you rate operating condition? Thanks

Johnatkinson3@Mac.com
  • 0

#3 Jeff McPhee

Jeff McPhee

    New Member

  • Sustaining Members
  • 0 posts

Posted 14 July 2011 - 02:04 PM

Attached File  Heden.jpg   69.15KB   89 downloadsI bought this Heden motor several years ago on EBAY thinking I could use this on a Bartech follow focus system I purchased, and then found it was not compatible. I have never used this motor but it seems in good shape, motor turn very smooth and almost no noise. Come with the different rail spacers pictured and a 0.8 pitch gear. I will give a three day return on this from time of shipping arrival.


Is this STD 4-pin lemo. How would you rate operating condition? Thanks

Johnatkinson3@Mac.com


Is has the stand four pin connector you decscribed, I do not have any way to test it. When I turn the gear the motor sound very smooth, near silent. Becuase I can't verify it state I am offering a three day return after the item shipping arrival to test it.
Thanks for your interest.
  • 0

#4 John atkinson

John atkinson

    Advanced Member

  • Sustaining Members
  • 145 posts
  • Florida

Posted 15 July 2011 - 05:59 AM

Attached File  Heden.jpg   69.15KB   89 downloadsI bought this Heden motor several years ago on EBAY thinking I could use this on a Bartech follow focus system I purchased, and then found it was not compatible. I have never used this motor but it seems in good shape, motor turn very smooth and almost no noise. Come with the different rail spacers pictured and a 0.8 pitch gear. I will give a three day return on this from time of shipping arrival.


Is this STD 4-pin lemo. How would you rate operating condition? Thanks

Johnatkinson3@Mac.com


Is has the stand four pin connector you decscribed, I do not have any way to test it. When I turn the gear the motor sound very smooth, near silent. Becuase I can't verify it state I am offering a three day return after the item shipping arrival to test it.
Thanks for your interest.


  • 0

#5 John atkinson

John atkinson

    Advanced Member

  • Sustaining Members
  • 145 posts
  • Florida

Posted 15 July 2011 - 06:01 AM

Send me your contact info, I'll take it

John Atkinson
6654 Cristina Marie Dr
Orlando, FL 32835

407-341-2491
  • 0




IDX

GPI Pro Systems

SkyDreams

Ritter Battery

Betz Tools for Stabilizers

Engineered Cinema Solutions

Boland Communications

Omnishot Systems

Teradek

Varizoom Follow Focus

Paralinx LLC

Wireless Video Systems

PLC Electronics Solutions

rebotnix Technologies

Media Blackout - Custom Cables and AKS

BOXX

PLC - Bartech