Jump to content



Photo

Flyer LE Arm Post


  • Please log in to reply
2 replies to this topic

#1 David Karger

David Karger

    Member

  • Sustaining Members
  • 12 posts

Posted 26 June 2011 - 05:17 PM

Hey,
I have a Flyer LE and I am wondering if anyone has any advice regarding how tight or loose the arm post (the thing the gimbal handle attaches to) should be with regard to rotating. The arm post appears to be made with a bushing, not a bearing, and when I received my rig (used) the arm post was pretty stiff to turn. I loosened it up a bit, but not sure if that was the correct thing to do. Thanks. Dave
  • 0

#2 Brandon Thompson

Brandon Thompson

    Advanced Member

  • Members
  • PipPipPip
  • 77 posts

Posted 26 June 2011 - 09:39 PM

It is all about preference. I have a flyer arm that you can not change the tension, but on full size arms you can and it all depends on what feels right for you.
  • 0

#3 David Karger

David Karger

    Member

  • Sustaining Members
  • 12 posts

Posted 27 June 2011 - 02:29 PM

OK, thanks. Just wanted to make sure I wasn't going to destroy something.
  • 0




rebotnix Technologies

Varizoom Follow Focus

BOXX

Paralinx LLC

Betz Tools for Stabilizers

Teradek

Wireless Video Systems

IDX

GPI Pro Systems

Omnishot Systems

PLC - Bartech

Engineered Cinema Solutions

PLC Electronics Solutions

Media Blackout - Custom Cables and AKS

SkyDreams

Boland Communications

Ritter Battery