Jump to content



Photo

No signal alexa /CamWave


  • Please log in to reply
4 replies to this topic

#1 jorge agero

jorge agero

    Advanced Member

  • Sustaining Members
  • 94 posts
  • madrid(SPAIN)

Posted 02 May 2011 - 09:44 AM

Hi people
Working whit alexa and canwabe no signal in canwabe is big problem!!!
Have you any solution?
Best regards
Jorge Agero
  • 0

#2 Ramon Engle

Ramon Engle

    Advanced Member

  • Sustaining Members
  • 513 posts
  • Atlanta

Posted 02 May 2011 - 10:52 AM

Hola Jorge.
Check your Monitor Out output signal. Make sure its set at 23.98.
That may be the issue............or not.
  • 0

#3 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1670 posts
  • Los Angeles, CA

Posted 02 May 2011 - 10:41 PM

Hola Jorge.
Check your Monitor Out output signal. Make sure its set at 23.98.
That may be the issue............or not.


yes, the camwave does not a straight 24fps signal.....
  • 0

#4 jorge agero

jorge agero

    Advanced Member

  • Sustaining Members
  • 94 posts
  • madrid(SPAIN)

Posted 03 May 2011 - 05:39 PM

The problem is that I'm feeding the camera to 24vol
and also from my pro camwave to 12vol and camwave
Anchored at the rear of the alexa and I think
I'm supercharging chamber, troubleshoot
feeding the whole of the battery chamber
to 12vol.
Best Regards

Jorge Agero
www.agero-steadicam.com
  • 0

#5 Brandon Sumner

Brandon Sumner

    Member

  • Sustaining Members
  • 16 posts
  • New York, NY

Posted 11 August 2011 - 01:31 PM

I was on an Alexa feature recently with the same issue.

It was the monitor output on the Alexa.

The AC switched it to 29.97 in that menu and it fixed it.
  • 0




BOXX

Media Blackout - Custom Cables and AKS

Wireless Video Systems

The Moses Pole - Steadicam Monopod

Omnishot Systems

Boland Communications

Betz Tools for Stabilizers

Engineered Cinema Solutions

Varizoom Follow Focus

PLC - Bartech

Ritter Battery

Paralinx LLC

GPI Pro Systems

PLC Electronics Solutions

rebotnix Technologies