Jump to content


Cable Caddy and ZOE Zoom control gimbal spacer

  • Please log in to reply
No replies to this topic

#1 Osvaldo Silvera SOC

Osvaldo Silvera SOC

    Advanced Member

  • Sustaining Members
  • 648 posts
  • Miami, FL

Posted 16 February 2011 - 11:24 PM

Hi folks, Just wanted to show a couple of parts that were made for me very quickly and have solved problems.
They were made by Jerry Kosan at http://www.jbkcinequipt.com/

First is a Delrin disc that installs under the top stage, helps keep the excess cable tidy from your gimbal mounted zoom and/or hard wire focus control. Sells them for $50, Just tell him the diameter of your post and he'll make you one right up. He puts two small allen screws on opposite sides and if you tell him the diameter of your zoom control cable, he'll cut a key way on two ends so the cable pops in and is lightly held.

Second... When I Attached the ZOE Zoom control on the XCS Gimbal, the rocker switch was so close to the soft rubbery cover on the gimbal that sometimes the rocker would get stuck and wouldn't stop zooming in or out, CATASTROPHE for the shot!. I needed to have it spaced out, So this little beauty was made. The production run will be black anodized of course. $50Attached File  183194_1849561321407_1311952604_2108086_6621091_n.jpg   48.22KB   92 downloads
  • 0



Camera Motion Research

rebotnix Technologies

Betz Tools for Stabilizers

Omnishot Systems

GPI Pro Systems

Boland Communications

Wireless Video Systems

Paralinx LLC

PLC Electronics Solutions

PLC - Bartech

Ritter Battery

Varizoom Follow Focus