My assistant (no names, to protect the guilty) dropped the transmitter and it’s broken!
It was in single channel mode at the time, ie just the tx and battery. I’m sure it could be repaired or you can use it for spares.
The second channel splitter handle and focus control are therefore fine, as is the receiver. It’d be ideal if you want to upgrade your single channel setup, or you’re handy with fixing things.
Heden M26p motor, with 0.5(Canon), 0.6(Fuji) and 0.8 gears and Optex mounting bracket. 550GBP
Heden M32p motor, with 0.5(Canon), 0.6(Fuji) and 0.8 gears and Optex mounting bracket. 650GBP
Pantali tx splitter handle, with 2nd channel tx controller
3 channel receiver with 90deg aerial, inc power cable (HRS 4 pin to HRS 4 pin)
Tx module (broken) with straight aerial
2x tx batteries and chargers (one cable modified to plug into fast charger via BP90 type plug) 1,500GBP
Heden motor cables (5 pin) @ 60 GBP each
3x straight motor cables
2x coiled motor cables
Camera run cables @ 50 GBP each
2x Arri (1 straight, 1 coiled)
1x Aaton (coiled)
1x Millennium (coiled)
1x Arri III
Receiver power cables @ 45 GBP each
1x Canon 4pin (UK spec 12v) (coiled)
1x tx power cable to Canon 4 pin (UK spec 12v) 40GBP
4x focus scale rings @ 5 GBP each
All prices in GBP, + delivery costs from the UK.
Dion Casey tel: +44(0)1460 30005