Jump to content


MK-V Steadicam Evolution Top-stage.

  • Please log in to reply
No replies to this topic

#1 Joe Bullen

Joe Bullen

    New Member

  • Sustaining Members
  • 2 posts
  • London.

Posted 17 September 2010 - 07:46 AM

I am replacing the topstage on my rig, and selling the one below. The J- box seen on some of the shots is not included; it’s permanently wired up and cannot be removed.

The post screws to the top of the rig using the standard allen attachment screws. Adjustment for balance is right/left on the stage itself and fore/aft using the geartracks bolted to the underside of of the baseplates. Three baseplates are supplied, and they have enough holes in them to match most camera types and can take standard 1/4″ and 7/8″ camera screws. Trim adjustments are made by the black dials shown.

A friction lock secures the baseplate when the rig is balanced- but there is also an emergency lock recessed into the side of the stage to prevent release if the plate slips. Bars at the front of the top stage allowa J box and remote focus units/ redbytes etc. to be mounted.

£850.00 plus shipping. Also advertised on my site www.joebullensteadicam.com,(one more shot included).

Any questions please email joe@joebullensteadiam.com or call + 44 (0) 7791 212263.

Thanks for looking.

Attached Files

  • 0

Varizoom Follow Focus

Engineered Cinema Solutions

rebotnix Technologies

GPI Pro Systems

PLC Electronics Solutions

Omnishot Systems

Wireless Video Systems

Boland Communications

Media Blackout - Custom Cables and AKS

Betz Tools for Stabilizers


The Moses Pole - Steadicam Monopod

Ritter Battery

PLC - Bartech

Paralinx LLC