Jump to content



Photo

MINT CONDITION PRO CABLES


  • Please log in to reply
No replies to this topic

#1 Chris Hood

Chris Hood

    Member

  • Sustaining Members
  • 16 posts
  • Hermosa Beach,CA

Posted 18 April 2010 - 04:41 PM

2- PRO to PRESTON MDR cables in absolute mint condition.

Asking $90.00 USD per cable or $160.00 for both

1- PRO sled to MODULUS cable in absolute mint condition.
This cable was used to improve video quality over the standard modulus cable that
ran power AND video. This is ONLY power and has a standard 6 pin hirose on one end
and a 3 pin lemo on the other. It is 19 inches in length. I used it on the extra 3 pin camera power
port on a PRO II upper J box. By doing it this way ( Mostly with Panavision XLs) I was able
to separate the power to the modulus and then run video directly from the video tap into the
transmitter. By not sending the signal through the sled I always had improved signal strength.

Asking $95.00 USD

Contact Chris Hood directly at the options below for any questions. Photos available.

chris_hood@verizon.net
310-880-2518

Contact Chris Hood at:

chris_hood@verizon.net
310-798-2467
  • 0




Betz Tools for Stabilizers

The Moses Pole - Steadicam Monopod

Paralinx LLC

PLC - Bartech

Media Blackout - Custom Cables and AKS

Ritter Battery

Omnishot Systems

BOXX

rebotnix Technologies

GPI Pro Systems

Wireless Video Systems

Engineered Cinema Solutions

Varizoom Follow Focus

PLC Electronics Solutions

Boland Communications