Jump to content



Photo

Live TV - operating


  • Please log in to reply
8 replies to this topic

#1 Niall Chadwick

Niall Chadwick

    Advanced Member

  • Members
  • PipPipPip
  • 31 posts

Posted 17 April 2010 - 12:11 PM

I recently spent 5 days working at the Gadget Show live in birmingham, in the Gaming zone.

Due to some technical issues, our wireless didnt work and I ended up having to use a tie line. Which made things rather interesting.

Looking back at the footage, Im still wobbly and floaty in certain areas. And on some occasions, being to close to the stage and having an MC who liked to walk back and forth made for some ugly panning and rather shocking framing :(

But I was wondering if any has some advice they could offer me for covering live events? Dos, donts, guidance etc.

I do have some of the footage on youtube, but its a bit too embarassing to show to the pros :)

Many thanks

Niall
  • 0

#2 AdamKeith

AdamKeith

    Advanced Member

  • Sustaining Members
  • 143 posts
  • NY/NJ

Posted 17 April 2010 - 01:25 PM

A couple of things that help for live tv cabled gigs are light fiber or triax jumpers and a tally system. Search the forum, there is plenty of info - including ways to run the cable.

Regards,
Adam Keith
  • 0

#3 Niall Chadwick

Niall Chadwick

    Advanced Member

  • Members
  • PipPipPip
  • 31 posts

Posted 18 April 2010 - 01:28 AM

Thanks Adam
  • 0

#4 Mike Germond SOC

Mike Germond SOC

    Advanced Member

  • Sustaining Members
  • 468 posts
  • Orlando Steadicam LLC

Posted 18 April 2010 - 02:59 PM

One of my new favorite little things for Live TV is a 2.5" LCD for PGM, because you can stick it right on top of your monitor, you'll always know when you're on, and believe it or not it works great for framing with graphics if required. Nevermind the 4:3 aspect, and most HD cameras can internally downconvert at least once. Pick the brand of your choice, but here's the general idea: http://www.markertek....xhtml?V2500PAL

Another must is a lightweight, flexible jumper as Adam mentioned. 6ft usually does the trick. The fiber variety will cost you the most, at about $700 from Mohawk last I checked.

That's all I need to cover my bases, the rest is just luxury..
  • 0

#5 Kevin Andrews SOC

Kevin Andrews SOC

    Advanced Member

  • Sustaining Members
  • 348 posts
  • Denver CO

Posted 19 April 2010 - 09:01 AM

If you were running heavy coax to your camera on that show, try RG-179 cables to break out hdsdi and genlock also from Markertek.
  • 0

#6 Robert Starling SOC

Robert Starling SOC

    Advanced Member

  • Sustaining Members
  • 1134 posts
  • Las Vegas, NV

Posted 19 April 2010 - 12:20 PM

Here's a little program monitor Rob Vuona turned me on to; the BOYO 3501 3.5" LCD. You can find it online for about $70 +/-. I had Terry West wire it for the video / power out on my sled so it's an easy solution. It's light enough that I attached it to the end of the monitor with a strip of 3M Dual Lock super velcro type tape.

Robert

Posted Image
  • 0

#7 Mike Germond SOC

Mike Germond SOC

    Advanced Member

  • Sustaining Members
  • 468 posts
  • Orlando Steadicam LLC

Posted 19 April 2010 - 01:32 PM

Thanks for posting that Robert, that's exactly what I have done with the 2.5"

It's a very sexy solution, especially if you can have sled specific cabling made to fit your application.
  • 0

#8 John atkinson

John atkinson

    Advanced Member

  • Sustaining Members
  • 145 posts
  • Florida

Posted 19 April 2010 - 08:36 PM

As long as I have seen steadicam used for live TV most operators have had Tally, program monitor, zoom and focus. To attempt otherwise will only limit what the steadicam can do. I recall working with a video guy from another country and he commented that most US TV Steadicam operators couldn't hold focus. This is especially true in HD.

JA
  • 0

#9 Niall Chadwick

Niall Chadwick

    Advanced Member

  • Members
  • PipPipPip
  • 31 posts

Posted 20 April 2010 - 01:09 AM

Blimey!

Thanks guys

I was only using a pilot at this event, but all this info is great to know. :)

If interested, gallery can be found at :

/nerd-mode I warn you, its a professional computer gaming event. And yes I'm in there.

I'm the one that looks like a sack tied in the middle with a steadicam strapped on :)

Edited by Niall Chadwick, 20 April 2010 - 01:17 AM.

  • 0




Ritter Battery

PLC - Bartech

GPI Pro Systems

BOXX

Varizoom Follow Focus

IDX

PLC Electronics Solutions

Omnishot Systems

SkyDreams

Teradek

rebotnix Technologies

Engineered Cinema Solutions

Boland Communications

Paralinx LLC

Betz Tools for Stabilizers

Wireless Video Systems

Media Blackout - Custom Cables and AKS