Jump to content



  • Please log in to reply
No replies to this topic

#1 Kyle Young

Kyle Young

    New Member

  • Sustaining Members
  • 3 posts
  • Los Angeles, CA USA

Posted 14 April 2010 - 07:46 PM

Pakcage 1: $22,500.00
Sled is all new material except the gimbal which I have overhauled.
sled 12/24 volt, HD ready- I really need to explain the wiring over the phone, All HD Wiring-3 lines top to bottom and another NTSC video in for a video distribution amp.
3A gimbal and wrap grip
new LUNA arm
3A vest customized with master series pads, buckles and straps.
sled case with refoamed custom cut foam, anvil style case used
vest& arm case, anvil style case used
c-stand and sand bag
docking bracket and dovetail plate with mounting screws
Steadicam workshop manual, EFP manual, Master Series Manual
schematics of all connectors and pin outs on sled
schematics of all popular cables except RED
Red byte down converter with power cable and two 6" BNC
One 3' BNC cable
7"NTSC/PAL LCD with power/video cable
2 t-handle Allen wrenches for arm
universal screwdriver

*no camera power cables
*IDX mounts are on there now and include 4 used E10 batteries and dual charger.
*I can have an Anton Bauer version mounted the same way but it would take about 1 week, it would include a used dual anton charger, 2 used ProPac 14 65wh batteries, and 2 used Digital Propac 14 65 wh batteries.

Kyle young

Palmdale, CA 93551 (Los Angeles)
  • 0

Camera Motion Research

PLC - Bartech

Omnishot Systems

Wireless Video Systems

Betz Tools for Stabilizers


Paralinx LLC


Boland Communications

GPI Pro Systems

Varizoom Follow Focus

PLC Electronics Solutions


rebotnix Technologies

Ritter Battery