Jump to content


Powering Accessories idea

  • Please log in to reply
1 reply to this topic

#1 Janice Arthur

Janice Arthur

    Advanced Member

  • Moderators
  • PipPipPip
  • 796 posts

Posted 09 April 2010 - 01:47 PM

Hi all;

It keeps coming up.

How do you power Follow Focuses and transmitters and lights, etc.on the little rigs and/or these little cameras in combination? (Let alone, not have to make and/or buy lots of different cables.)

I'm mounting an Anton-bauer plate to my weight plates and using a 4-pin xlr spud off that and/or a P-tap multi plug.

Because there is a lot of extra space on those plates you can mount it flat, at the back and simply justify the camera forward on the plate.

If you use lightweight AB Batts they are small and compact. V mount would work too.

Just an idea that is so far the best thing I've thought of.

Pictures to follow.

  • 0

#2 Louis Puli SOC

Louis Puli SOC

    Advanced Member

  • Moderators
  • PipPipPip
  • 414 posts
  • Australia

Posted 09 April 2010 - 07:57 PM

Hi everyone
There are a few Flyer guys using this system from (see photo) Battery Distribution system BDv2
www.remoteaudio.com which is mounted under the flyer top stage . From all reports works well
Good luck
Louis Puli

Attached Files

  • 0

PLC - Bartech

Boland Communications

PLC Electronics Solutions

Paralinx LLC

Varizoom Follow Focus

Camera Motion Research

Ritter Battery

GPI Pro Systems

Betz Tools for Stabilizers

rebotnix Technologies




Wireless Video Systems

Omnishot Systems