Jump to content



Photo

PRO MODULUS POWER CABLE


  • Please log in to reply
No replies to this topic

#1 Chris Hood

Chris Hood

    Member

  • Sustaining Members
  • 16 posts
  • Hermosa Beach,CA

Posted 01 April 2010 - 01:15 PM

Selling a power cable for a modulus transmitter. Cable is in absolute mint condition.
This cable was used to improve video quality over the standard modulus cable that
ran power AND video. This is ONLY power and has a standard 6 pin hirose on one end
and a 3 pin lemo on the other. It is 19 inches in length. I used it on the extra 3 pin power
out port on a PRO II upper J box. By doing it this way ( Mostly with Panavision XLs) I was able
to separate the power to the modulus and then run video directly from the video tap into the
transmitter. By not sending the signal through the sled I always had improved signal strength.

Asking $95.00 USD

Contact Chris Hood directly at the options below for any questions

chris_hood@verizon.net
310-880-2518
  • 0




Teradek

Boland Communications

Varizoom Follow Focus

Wireless Video Systems

rebotnix Technologies

Media Blackout - Custom Cables and AKS

Betz Tools for Stabilizers

SkyDreams

PLC - Bartech

PLC Electronics Solutions

Paralinx LLC

GPI Pro Systems

BOXX

Omnishot Systems

Ritter Battery

Engineered Cinema Solutions

IDX