Jump to content



Photo

FMG 6 (made by mk-v) question


  • Please log in to reply
4 replies to this topic

#1 Nikolay Kerezov

Nikolay Kerezov

    Advanced Member

  • Sustaining Members
  • 144 posts
  • Sofia;Bulgaria

Posted 14 October 2009 - 07:28 AM

Does anyone know the pinout diagram on the 5 pin Lemo 0B on a FMG 6 connector?
Need to make 5 pin Lemo 0B to 5pin Lemo 1B cable .
Thanks in advance!
  • 0

#2 JimBartell

JimBartell

    Advanced Member

  • Sustaining Members
  • 495 posts
  • Long Beach, CA, USA

Posted 14 October 2009 - 10:16 AM

Does anyone know the pinout diagram on the 5 pin Lemo 0B on a FMG 6 connector?
Need to make 5 pin Lemo 0B to 5pin Lemo 1B cable .
Thanks in advance!


Assuming the MK-V motor is the same as the original FMG-6, it is a one to one cable (pin 1 to pin1, pin 2 to pin 2, etc.).

Jim "made one yesterday" Bartell
  • 0

#3 Nikolay Kerezov

Nikolay Kerezov

    Advanced Member

  • Sustaining Members
  • 144 posts
  • Sofia;Bulgaria

Posted 14 October 2009 - 10:43 AM

Does anyone know the pinout diagram on the 5 pin Lemo 0B on a FMG 6 connector?
Need to make 5 pin Lemo 0B to 5pin Lemo 1B cable .
Thanks in advance!


Assuming the MK-V motor is the same as the original FMG-6, it is a one to one cable (pin 1 to pin1, pin 2 to pin 2, etc.).

Jim "made one yesterday" Bartell

I knew it!
Thanks Jim!

Nikolay "will made one tomorrow" Kerezov
  • 0

#4 Russell McElhatton

Russell McElhatton

    Member

  • Sustaining Members
  • 29 posts

Posted 14 October 2009 - 10:40 PM

Shameless shipping for Bartell!
Jim came to my set yesterday, had lunch, had pleasant conversation, caught me up on various Steadicam characters, replaced a bad chip in my iris handset, made me an FMG 6 spare cable, sent it overnight and I got it the next day upon returning home. I believe he danced a jig as well.

Russ "Jim made it for me yesterday" McElhatton
  • 0

#5 JimBartell

JimBartell

    Advanced Member

  • Sustaining Members
  • 495 posts
  • Long Beach, CA, USA

Posted 17 October 2009 - 10:40 AM

Shameless shipping for Bartell!
Jim came to my set yesterday, had lunch, had pleasant conversation, caught me up on various Steadicam characters, replaced a bad chip in my iris handset, made me an FMG 6 spare cable, sent it overnight and I got it the next day upon returning home. I believe he danced a jig as well.

Russ "Jim made it for me yesterday" McElhatton

I'm afraid my willingness to do anything for a free lunch has become entirely too well known. Please be advised that the jig is strictly optional. It was the fact that Russ stalled lunch for 30 minutes so it wouldn't start without me that brought it out.

Jim "will riverdance for prime rib" Bartell
  • 0




Teradek

Boland Communications

PLC Electronics Solutions

rebotnix Technologies

PLC - Bartech

BOXX

Varizoom Follow Focus

SkyDreams

Betz Tools for Stabilizers

IDX

Engineered Cinema Solutions

Paralinx LLC

Media Blackout - Custom Cables and AKS

Omnishot Systems

Wireless Video Systems

Ritter Battery

GPI Pro Systems