Jump to content



Photo

PRO 1 with Preston


  • Please log in to reply
1 reply to this topic

#1 Erwin Landau

Erwin Landau

    Advanced Member

  • Moderators
  • PipPipPip
  • 1699 posts
  • TBD

Posted 28 September 2009 - 07:27 AM

For Sale:

PRO 1

Donkey Box II
Junction Box
Center Post
Gimbal
Wrapgrip II Oversize (Black) (2 1/4 x 5")
Wrapgrip II Oversize (Red) (2 1/4 x 3.5")
Monitor Arm (Short)
Monitor Arm (Long)
Monitor Arm (Regular)
Transvideo Cinemonitor I
Transvideo Rainbow LCD Monitor
Transvideo Frameline Generator
Level Sensor I
PRO 1 Battery cage with quick connector
PRO 1 Battery cage (back up)
Recorder Bracket
Rain gear for battery cage
Dockclamps (2)
Pelican Case 1650

20 PRO batteries
3 PAG chargers
10 charging cables
Anvil shipping cases

Docking Bracket II
Camera Truck wall mount
Transvideo Knee Joint with Clamp
ARRI-3 Lowmode bracket
J-Bracket
Compact/Pana Camera Plate 9" (2)
Compact/Pana Camera Plate 7" (1)
Arri/Pana Camera Plate 9" (1)
Camera Screws (4)

Hardmount
Balancing beam (with Junior spud)

Transvideo Pana Power (24Volt) (4)
Transvideo to 4 pin XLR Power (12 Volt)
Transvideo to 3 pin XLR Power (24 Volt) 6 feet
LCD to Frameline power/data (2)
Transvideo to PRO monitor plug Y-Cable (4)
Transvideo to PRO monitor plug Y-Cable (long)
Transvideo to PRO video plug Y-Cable (5)

PRO Camera Power cables for most cameras

Sony 8" Fieldmonitor
Monitor tray
Sony 1041 receiver
Single channel transmitter (5)
Sony GVU-5 Onboard recorder

Lightweight Lightbox for steadicam

UHF Preston
FIZ Handunit
UHF Motor Driver (MDR)
MDR to PRO mounting bracket
UHF Radio Transmitter (2)
2 chargers
Transmitter batteries (many)
DM-1 Motor (2)
Gears
Mounting brackets
Panavision Steadicam Bracket
Antennas
Many, many spares


And tons and tons of little one offs, custom parts, etc.


Rig received full service by GPI. Cleaned and Lubed, broken parts replaced etc.
Batteries, 11 are recelled, 7 are good, 2 unknown (Button doesn't work, replacements are included)
Both Monitors and frameliner received full service from Transvideo. Notch Filter new on both units.

This is one of Bob Ullands old rigs.

Thank you to George Paddock and his team, Marianne from Transvideo and her team as well as Tiffen and Preston Cinema for the great service and effort to get this rigs ready to be passed on to the next generation of operators.


The greatest care has been taken to insure that all parts are in perfect working order.


NO ARM, NO VEST included, check the other listings.


Price: $37'000.-


For Pictures, Please Check:

http://www.steadicam...p?recordID=4117
  • 0

#2 Erwin Landau

Erwin Landau

    Advanced Member

  • Moderators
  • PipPipPip
  • 1699 posts
  • TBD

Posted 13 October 2009 - 01:19 AM

SOLD!
  • 0




Wireless Video Systems

PLC - Bartech

BOXX

Omnishot Systems

Teradek

Engineered Cinema Solutions

PLC Electronics Solutions

rebotnix Technologies

Varizoom Follow Focus

Media Blackout - Custom Cables and AKS

Betz Tools for Stabilizers

Boland Communications

IDX

Ritter Battery

GPI Pro Systems

SkyDreams

Paralinx LLC