Jump to content


Phantom camera cables

  • Please log in to reply
2 replies to this topic

#1 Ramon Engle

Ramon Engle

    Advanced Member

  • Sustaining Members
  • 513 posts
  • Atlanta

Posted 07 April 2018 - 08:55 PM

Anyone familiar with Phantom power cables and remote on off interface cables? Not exactly sure model im using but im assuming the recent versions are similar. Maybe I shouldnt assume.

  • 0

#2 Frederic Chamberland

Frederic Chamberland

    Advanced Member

  • Sustaining Members
  • 286 posts
  • Montreal

Posted 08 April 2018 - 09:13 AM

The Flex4k has a different power connector than the new VEO series. Here's a link to my PRO/Flex4K cable. The VEO has a different power connector (you can actually use 2 different connectors on these cameras)....Also, since the VEO is so small (smaller than a Mini), you might want to use an on board battery at the back if you have a power box attached to it. 





As for on/off : if you are using Iphantom, let the phantom tech use that technology (micro router on camera linked to an ipad) .  There is a possibility to use triggers from BNC or 3 pins arri RS connector on the flex 4k.  VEO is triggered by BNC or again Iphantom thru router. Or if you have a Mini bob breaker box, you will have BNC triggers. Lots of config . Maybe too many actually.... Good luck.

  • 0

#3 Ramon Engle

Ramon Engle

    Advanced Member

  • Sustaining Members
  • 513 posts
  • Atlanta

Posted 08 April 2018 - 09:29 AM

Thanks Frederic. Great info.
  • 0

Media Blackout - Custom Cables and AKS

Betz Tools for Stabilizers

Varizoom Follow Focus

Engineered Cinema Solutions

PLC Electronics Solutions

GPI Pro Systems


Boland Communications

Paralinx LLC

PLC - Bartech

rebotnix Technologies

Wireless Video Systems

The Moses Pole - Steadicam Monopod

Ritter Battery

Omnishot Systems