Jump to content



Photo

Help/advice on removing EFP gimbal for repair

efp gimbal service repair recenter center re re-center

  • Please log in to reply
3 replies to this topic

#1 Mike Lemnitzer

Mike Lemnitzer

    New Member

  • Members
  • Pip
  • 4 posts
  • Los Angeles

Posted 16 January 2018 - 01:06 AM

So I have a modified EFP sled that I had rewired by Terry for HD and 12/24v last year. Came to the conclusion my gimbal needs to be re-centered so I brought it to Robert Luna. He needs the gimbal off the post so he can work on it. I futzed around with it and realized I have no way of removing the gimbal off the sled. There's no break point in the cable line anywhere between my top stage and bottom stage. It's a wrapped bundle from top to bottom. My thoughts are I have two, maybe three options:

 

1. Bring the sled back to Terry and create a break point

2. Disconnect/cut the cables somewhere, get the gimbal fixed, then reconnect cables/Terry creates a break point wherever I cut cables.

3. If I can't just add a break in the line, have Terry disconnect, Luna fixes the gimbal, then Terry reconnects everything (basically I don't take any chances doing it myself and causing horrible, horrible damage). 

 

Is there something else I can do? Someone else who can shim my gimbal while it's still on the post? Save me from this cruel fate? I've attached three photos sort of showing the cable. 

 

My set up:

MKV carbon fiber 2 stage post

EFP gimbal

EFP top stage

EFP/modified battery rack

 

Any help is greatly appreciated. I really want to get this sled up and running at 100% again soon!

 

Attached File  IMG_0267.JPG   102.19KB   12 downloadsAttached File  IMG_0266.JPG   82.72KB   11 downloadsAttached File  IMG_0268.JPG   94.3KB   10 downloads


  • 0

#2 Holger Zechel

Holger Zechel

    Member

  • Members
  • PipPip
  • 10 posts
  • Hannover, Germany

Posted 03 May 2018 - 04:55 AM

Did you solved the Problem ?
  • 0

#3 Stefano Ben

Stefano Ben

    Advanced Member

  • Sustaining Members
  • 107 posts
  • Italy

Posted 04 May 2018 - 01:26 AM

The Solution it's to cut at some point the power/video cable that run into the center post and re-wire the lower junction box adding 2 lemo connectors for a quick unplug. Basically your point n.2!


  • 0

#4 Holger Zechel

Holger Zechel

    Member

  • Members
  • PipPip
  • 10 posts
  • Hannover, Germany

Posted 04 May 2018 - 04:20 AM

I managed it to disassemble the gimbal without cutting the cable. The connectors at the lower end are small enough to fit through the hole in the post.

Edited by Holger Zechel, 04 May 2018 - 04:20 AM.

  • 0





Also tagged with one or more of these keywords: efp, gimbal, service, repair, recenter, center, re, re-center

Varizoom Follow Focus

Media Blackout - Custom Cables and AKS

Paralinx LLC

Boland Communications

Engineered Cinema Solutions

BOXX

The Moses Pole - Steadicam Monopod

GPI Pro Systems

rebotnix Technologies

Ritter Battery

PLC - Bartech

Wireless Video Systems

Omnishot Systems

Betz Tools for Stabilizers

PLC Electronics Solutions