Jump to content



Photo

Which Wheels for the American Steadicam Stand?


  • Please log in to reply
9 replies to this topic

#1 Scott Kealoha

Scott Kealoha

    New Member

  • Sustaining Members
  • 4 posts

Posted 13 August 2011 - 04:08 PM

Just ordered the American 2 Riser Steadicam stand (LS32). What caster wheels does everyone recommend?

Thoughts on the 1" leg adapter wheels from (RSA02B) from American Grip?
How about the Mag Steadicam 8"wheel set (Mag-SS W-08) from Backstageweb.com ?

Anyone else worth taking a look at?

Thanks
  • 0

#2 Richard James Lewis

Richard James Lewis

    Advanced Member

  • Members
  • PipPipPip
  • 397 posts
  • London, UK

Posted 13 August 2011 - 04:42 PM

I tried the wheels Tiffen sell for the America stand, and used them for about 8 months. It was a novelty to wheel the thing around at first, and everything was fine on flat studio type floors, but go off road and you become a bit stuck.

I switched to the 8" wheel set from Backstage and couldn't be happier. Just make sure to always push over a leg or the whole thing will go over!

Rick.


Just ordered the American 2 Riser Steadicam stand (LS32). What caster wheels does everyone recommend?

Thoughts on the 1" leg adapter wheels from (RSA02B) from American Grip?
How about the Mag Steadicam 8"wheel set (Mag-SS W-08) from Backstageweb.com ?

Anyone else worth taking a look at?

Thanks


  • 0

#3 Jess Haas SOC

Jess Haas SOC

    Advanced Member

  • Sustaining Members
  • 1146 posts
  • Culver City, CA

Posted 13 August 2011 - 11:05 PM

Yeah it took me a whole day of almost falling over repeatedly to stop pushing it in unsafe positions. Now i try to drill into all of my ACs heads that they should always keep the sled towards them and one leg forward while rolling. I did have one AC trip with it and take the sled to the ground. He caught it just in time and there was no damage but you should have seen the look on his face :-)

I have both kinds of wheels and use them for different things. the 8" backstage are great outside or on a roomy stage but take up a lot of room inside and don't fit through doors well. They add a big footprint and a good amount of mass at the base which helps to keep the stand stable. The ones American sells take up a lot less space and lock solid but are really only good on a smooth floor and don't handle any sort of bump well. I use them in some tight spaces and when traveling since they are lighter and smaller.

American recently redid their Steadicam stands with a wider base so im not sure how well either set of wheels fits anymore. Does anyone know if the new stands are stable when locked in a position to give the right angle for the wheels? The new paint that they are using is a huge improvement over the old powdercoating.

-Jess
  • 0

#4 Eric Fletcher S.O.C.

Eric Fletcher S.O.C.

    Advanced Member

  • Sustaining Members
  • 2922 posts
  • LA, Ca

Posted 14 August 2011 - 12:43 AM

I have Inovativ building me a set of their caster wheels for my steadicam stand. It's going to be a NICE alternative to the crappy wheel choices we have now
  • 0

#5 Eric Schilling

Eric Schilling

    New Member

  • Members
  • Pip
  • 5 posts
  • Los Angeles

Posted 03 September 2011 - 09:41 PM

I have these on my stand and they work great. 6 inch light duty casters with one inch threaded stem. http://www.castercit...ic-casters.htm.

Attached Files


Edited by Eric Schilling, 03 September 2011 - 09:43 PM.

  • 0

#6 Robert Starling SOC

Robert Starling SOC

    Advanced Member

  • Sustaining Members
  • 1134 posts
  • Las Vegas, NV

Posted 04 September 2011 - 03:37 PM

I started with the 4" wheels; they were light, easy to maneuver and again light. The downside is that they don't roll over studio cabling well at all.

Now I have the Backstage pneumatic wheels and they pretty much roll over anything, plus they widen the base for more stability. The downside is that they are heavier than the stand itself and a pain in the butt to get through a standard or even small commercial doorway. Love the wheels but would love to have a lighter set. When Eric gets his new set I want to see them.

As far as moving the stand around, I borrowed a tip from Will Arnot where he puts a strip of neon pink 1" gaff down two legs and a 1" strip of neon green gaff down the other leg. The sled always docks over the green and the green always rolls first. The tape also adds a bit of safety for the trip hazard aspect of it.

Robert
  • 0

#7 Scott Kealoha

Scott Kealoha

    New Member

  • Sustaining Members
  • 4 posts

Posted 06 September 2011 - 11:10 PM

Thanks, everyone! Great information and advice.

I ended up with the American Grip wheels mainly because of the price ($135.00 plus shipping) and because I wasn't smart enough to post before I ordered them :). I had originally thought these would be too small, but realized the 1" refers to the Steadi Stand leg measurement and they are actually 4" in diameter.
  • 0

#8 Scott Kealoha

Scott Kealoha

    New Member

  • Sustaining Members
  • 4 posts

Posted 06 September 2011 - 11:25 PM

Thanks, everyone! Great information and advice.

I ended up with the American Grip wheels mainly because of the price ($135.00 plus shipping) and because I wasn't smart enough to post before I ordered them :). I had originally thought these would be too small, but realized the 1" refers to the Steadi Stand leg measurement and they are actually 4" in diameter.
  • 0

#9 Kevin Jacobsen

Kevin Jacobsen

    New Member

  • Sustaining Members
  • 6 posts
  • Brooklyn, NY

Posted 16 January 2018 - 11:23 AM

Granted this was nearly six and a half years ago but, how did you like them?


  • 0

#10 brett.mayfield

brett.mayfield

    Advanced Member

  • Sustaining Members
  • 262 posts
  • hotlanta

Posted 16 January 2018 - 06:08 PM

the 8" pneumatics from backstage are the way to go. the price is rite, the brakes works fine enough, they roll over everything. i cant deal with casters. and the inovativ wheels dont have the value of their price.

 

brett.


  • 0




PLC Electronics Solutions

Paralinx LLC

Varizoom Follow Focus

The Moses Pole - Steadicam Monopod

BOXX

Ritter Battery

Engineered Cinema Solutions

Omnishot Systems

Media Blackout - Custom Cables and AKS

GPI Pro Systems

PLC - Bartech

Betz Tools for Stabilizers

Boland Communications

rebotnix Technologies

Wireless Video Systems