Jump to content



Photo

Got hit, now sled wont balance

DamageSled balance

  • Please log in to reply
2 replies to this topic

#1 Nathaniel C. T. Jackson

Nathaniel C. T. Jackson

    Member

  • Members
  • PipPip
  • 12 posts

Posted 12 November 2017 - 06:22 PM

Hey team,

 

So I got clipped by a wheelchair rugby player, went down rather hard, seemed to be fine. The only thing I broke was the monitor yoke that Frederic Sturm makes. He sent me a new one so was all good to go. Now I haven't touched the rig for a while and puled it out on Friday in prep for a job and find that the sled can not be balanced no matter how hard I try.

 

The problem:

I static balance, rotate 180 degrees & I am vastly out of balance. If I balance up again, rotate 180 again, I am back out of balance by a lot. Also the sled will spin to find its lowest cog.

 

Model:

Steadicam Zephyr with the extra bits Frederic Stum wonderfully makes.

 

I am guessing it has something to do with the gimbal. That said, it is rather perplexing as to what would cause this. Any one have any ideas? Is this something I can try to adjust on my own?

 

I am most likely going to send it in to get looked at unless someone has direct experience that I can reasonably follow.

 

Thanks peeps in advance.

 

Nat J


  • 0

#2 Francisco Orozco Jr

Francisco Orozco Jr

    Advanced Member

  • Members
  • PipPipPip
  • 30 posts
  • Arizona

Posted 12 November 2017 - 06:35 PM

If the gimbal fork isn't bent then you could try centering the gimbal again by following the instructions for the ultra 2 gimbal.

http://www.tiffen.co...alCentering.pdf
  • 0

#3 Nathaniel C. T. Jackson

Nathaniel C. T. Jackson

    Member

  • Members
  • PipPip
  • 12 posts

Posted 13 November 2017 - 08:34 PM

Bent gimbals pin is the culprit. Steadicam are sending the bits we need.

Thanks for the help Francisco.

 

Nat J


  • 0





Also tagged with one or more of these keywords: DamageSled, balance

Varizoom Follow Focus

Betz Tools for Stabilizers

Omnishot Systems

GPI Pro Systems

Teradek

BOXX

rebotnix Technologies

PLC Electronics Solutions

IDX

PLC - Bartech

Boland Communications

Engineered Cinema Solutions

Wireless Video Systems

SkyDreams

Ritter Battery

Paralinx LLC

Media Blackout - Custom Cables and AKS