Posted 13 October 2017 - 01:13 PM
I have now a very strange bouncing on the sled, is only vertical and very rithmic, almost like the sled has a hearth bit. I tried unpluging the Wave and doferent configurations and is still there.
Wondering if somebody heard of this before,
This is what I recently did with my sled (Ultra):
Git rid if the tilt stage
Serviced the gimbal with Robert Luna
Added an SDI line
Switched my Ultra brite to an HD 703
Any leads apreciated
Posted 13 November 2017 - 09:21 AM
The issue started after the gimbal was serviced.
Other than that Im bery happy with the conversion, pretty small distance to the CG of the camera with the Wave on and I also went full 12v on the sled to get rid of any power issues.
Still waiting to hear if anybody has gone through something like this
Posted 15 November 2017 - 10:09 AM
So did you solve your issue ?
Every single stabilized 'gimbal on a stick' - wave, trinity you name it - has a bit of that 'side-to-side' weaving.
Basically the roll axis stabilization keeps your horizon straight. but the camera still moves a bit side-to-side
as the sled goes off balance.