I work with cabled cameras.
I have a thin mohawk jumper cable similar to this, but 6 feet
I have had to work with a standard size fiber cable and what I do is a trick I learned from Jerry Holway when he would work with cabled cameras. That is I run the fiber under the shoulder hump of the camera and down the post to the gimbal. I then run the cable betwixt my fingers on the gimbal and wrap the fiber around my arm. it goes down the back of the vest and exits to the wrangler. this photo here shows when standard fiber is used.
The thin cable I run along the rig's arm and it exits off the arm to the wrangler.
Edited by Marc_Abernathy, 09 July 2016 - 11:49 PM.