Jump to content



Photo

Do you hang your Arm on a C-Stand


  • Please log in to reply
1 reply to this topic

#1 Tom Swiss

Tom Swiss

    Member

  • Members
  • PipPip
  • 12 posts

Posted 11 July 2018 - 08:13 PM

I used to hang my Steadicam Zephyr arm through the O-ring around the aircraft pin over the stud on the docking bracket. It fell off and bent the aircraft pin; not a good solution.

 

If you hang your Steadicam on the same c-stand of the docking bracket, how do you do it? Any photos on the internet? I only come up with guys wearing the Zephyr.


  • 0

#2 Lisa Sene

Lisa Sene

    Advanced Member

  • Members
  • PipPipPip
  • 72 posts
  • New York, NY

Posted 13 July 2018 - 10:18 PM

Hi Tom,

 

The Zephyr arms usually come with a webbing loop around the aircraft pin - see the red vertical line in the attached picture. I've also seen folks attach a loop through the bottom circle, highlighted in the picture with the red circle. 

 

While I usually put my G-50x arm on my cart if it's nearby, if I'm working off my rolling stand, I hang it. I use a spare Domke lens wrap around the stand to cushion it where the arm touches so it doesn't get dinged up when it's moved. 

 

Happy flying!

 

Lisa

Attached Files


  • 0




Boland Communications

PLC Electronics Solutions

Omnishot Systems

Paralinx LLC

BOXX

rebotnix Technologies

PLC - Bartech

Media Blackout - Custom Cables and AKS

Ritter Battery

GPI Pro Systems

Varizoom Follow Focus

Wireless Video Systems

Betz Tools for Stabilizers

Engineered Cinema Solutions