Jump to content



Photo

New Boland DayBrite


  • Please log in to reply
99 replies to this topic

#1 Gary Litwin

Gary Litwin

    Advanced Member

  • Sustaining Members
  • 50 posts

Posted 16 January 2015 - 03:06 PM

Hi All,

 

Just wanted to let you know that we (Boland) have a new 7" (16:9 native) DayBrite coming very soon.  Anti-reflective, 1500 nts, markers,scopes, great off axis, matte finish, etc. First few models are already in hands of a few sc pros for trial and feedback. 

 

Estimated cost in low $2K range.

 

Pix attached.

 

If you have any questions please let me know.....?

 

Best,

Gary

Attached Files


  • 1

#2 Walter F. Rodriguez

Walter F. Rodriguez

    Advanced Member

  • Sustaining Members
  • 176 posts

Posted 16 January 2015 - 03:11 PM

What is the resolution of the screen? Please make sure the screen has a zoom function! 10% at a time is best.
  • 0

#3 Alan Rencher

Alan Rencher

    Advanced Member

  • Sustaining Members
  • 1091 posts
  • Los Angeles

Posted 16 January 2015 - 03:18 PM

Is there a web page up with specs yet?


  • 0

#4 Gary Litwin

Gary Litwin

    Advanced Member

  • Sustaining Members
  • 50 posts

Posted 16 January 2015 - 03:43 PM

i haven't posted it to our site quite yet, but if you email me I can send you the prelim spec sheet.  I say prelim because we will be making some changes based on user feedback.  

 

It does have zoom, peaking filter, false color, waveform and vector and audio meters (and small built in speakers), and will do cross conversion SDI to HDMI and HDMI to SDI; selectable color temps, RBG and gamma curve adjust , etc 


  • 0

#5 Rob Vuona SOC

Rob Vuona SOC

    Advanced Member

  • Sustaining Members
  • 1143 posts
  • Los Angeles

Posted 16 January 2015 - 04:43 PM

Great to hear Gary,

Will it have Tally as well,  ?


  • 0

#6 Chris Loh

Chris Loh

    Advanced Member

  • Sustaining Members
  • 35 posts
  • Los Angeles

Posted 16 January 2015 - 04:54 PM

Specs look great! How much will it weight? 


  • 0

#7 Gary Litwin

Gary Litwin

    Advanced Member

  • Sustaining Members
  • 50 posts

Posted 16 January 2015 - 07:04 PM

Yes, tally is already on board :-)

 

Weight? To be completely honest, I sent both units out for eval so I can't weigh it right this sec (my apologies).  According to some early (last week) user feedback, it's pretty light.

 

As soon as I get one back in, I promise I will hand - weigh it and let you know.


  • 0

#8 Frederic Chamberland

Frederic Chamberland

    Advanced Member

  • Sustaining Members
  • 281 posts
  • Montreal

Posted 16 January 2015 - 07:32 PM

Does it have a fan ? I sold my Boland at the time because of this. It was very intense. Great screen for sure . Built quality was there also.


  • 0

#9 Alan Rencher

Alan Rencher

    Advanced Member

  • Sustaining Members
  • 1091 posts
  • Los Angeles

Posted 16 January 2015 - 11:24 PM

What connector does it use for tally? Is it a phone connector like some of the other monitors?
  • 0

#10 Michael Desiderio

Michael Desiderio

    Advanced Member

  • Sustaining Members
  • 104 posts
  • New York

Posted 17 January 2015 - 01:41 AM

digital horizon option?


  • 0

#11 Gary Litwin

Gary Litwin

    Advanced Member

  • Sustaining Members
  • 50 posts

Posted 17 January 2015 - 08:30 PM

Tally is through GPI (which has a connector kind of like a phone connector as mentioned above. And definitely no more fan...back light is LED

We are still looking at the possibility of some kind of digital horizon but it's not onboard yet
  • 0

#12 Alan Rencher

Alan Rencher

    Advanced Member

  • Sustaining Members
  • 1091 posts
  • Los Angeles

Posted 17 January 2015 - 09:25 PM

Great, I have all the right stuff to make tally cables for this monitor!
  • 0

#13 Martin Stacey

Martin Stacey

    Advanced Member

  • Sustaining Members
  • 201 posts
  • Adrenochrome, New Zealand

Posted 18 January 2015 - 02:21 AM

Bonded glass or plastic? I have been looking at the Transvideo Rainbow HD but have been reluctant to invest in an easily scratched screen after past experiences. Also is it water reseistant (not going to die in an unexpected downpour)?
  • 0

#14 Gary Litwin

Gary Litwin

    Advanced Member

  • Sustaining Members
  • 50 posts

Posted 18 January 2015 - 11:35 AM

Hi Martin,

We are not bonding at all on this one....so you have pure LCD. On the picture above, you may note 4 screw holes on the front of the cabinet. We are going to offer glass that can be easily mounted and or removed as you see fit....either for production reasons or as needed for replacement.

This monitor is not waterproof...although ....I do have a friend in Florida that dropped our 8" DayBrite in salt water, completely submerged, and to our shock, after rinsing and drying it was fully functional :-)

That being said, we suggest that our units should be kept as dry as possible
  • 0

#15 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1656 posts
  • Los Angeles, CA

Posted 18 January 2015 - 11:40 AM

The Rainbow HD has a glass front with AR but not bonded.

Bonded glass or plastic? I have been looking at the Transvideo Rainbow HD but have been reluctant to invest in an easily scratched screen after past experiences. Also is it water reseistant (not going to die in an unexpected downpour)?


  • 0




rebotnix Technologies

GPI Pro Systems

Boland Communications

Teradek

IDX

Varizoom Follow Focus

Wireless Video Systems

BOXX

Engineered Cinema Solutions

SkyDreams

PLC - Bartech

Ritter Battery

Betz Tools for Stabilizers

Media Blackout - Custom Cables and AKS

Omnishot Systems

PLC Electronics Solutions

Paralinx LLC