Jump to content



Photo

Heads Up for V-Mount plates


  • Please log in to reply
3 replies to this topic

#1 John Ritter

John Ritter

    Advanced Member

  • Sustaining Members
  • 55 posts
  • Fort Lauderdale, Florida

Posted 21 August 2012 - 10:40 PM

Just thought I would pass on an observation that seems to be trending this year,

For all who use V-Mount batteries I have noticed that pin wear has been an issue with V-mount systems.

So far this year I have traced 6 battery issues down to worn V-mount plates or to be more precise it is the positive and negative pins.

Check your battery female contacts for signs of heat damage/melting you will be able to actually see it as the plastic will bubble
or deform around the contacts.

If you notice this occurring either change out the plate or send it back for pin replacement.

Also if you are filming in or around water, especially salt water it is a good idea to coat the contacts with conductive grease,
water corrosion will usually show as a green fuzzy film on the copper contacts. (had 9 of these come in)

Thought I would mention this as I am looking at 7 RED Brick batteries all with damaged contacts..............

Regards John Ritter
  • 0

#2 Alan Rencher

Alan Rencher

    Advanced Member

  • Sustaining Members
  • 1098 posts
  • Los Angeles

Posted 22 August 2012 - 12:27 AM

That is definitely the biggest problem with V-Mounts! I've never seen this problem with Anton/Bauer. Has anyone had this issue with A/B Plates?
  • 0

#3 Eric Fletcher S.O.C.

Eric Fletcher S.O.C.

    Advanced Member

  • Sustaining Members
  • 2922 posts
  • LA, Ca

Posted 22 August 2012 - 07:31 AM

That is definitely the biggest problem with V-Mounts! I've never seen this problem with Anton/Bauer. Has anyone had this issue with A/B Plates?



Nope and I even have a few plates that are 20+ years old
  • 0

#4 Erwin Landau

Erwin Landau

    Advanced Member

  • Moderators
  • PipPipPip
  • 1699 posts
  • TBD

Posted 29 August 2012 - 08:26 AM

That is definitely the biggest problem with V-Mounts! I've never seen this problem with Anton/Bauer. Has anyone had this issue with A/B Plates?



Never! I think that AB was and still is on the right track with their Gold Mount design. All of my so far seven sleds were AB and no trouble whatsoever... okay the wobble... but a couple of strips of velcro and they are sitting better then any V-Mount... And John... RED? What can I say.

Fly safe,

Erwin
  • 0




Omnishot Systems

Paralinx LLC

BOXX

Varizoom Follow Focus

rebotnix Technologies

GPI Pro Systems

Wireless Video Systems

Engineered Cinema Solutions

Ritter Battery

PLC - Bartech

Media Blackout - Custom Cables and AKS

Boland Communications

The Moses Pole - Steadicam Monopod

PLC Electronics Solutions

Betz Tools for Stabilizers