Having a problem with the level. When the monitor is powered up the level will not stop bouncing back and forth. Does anyone have any ideas??
Jon Myers
Cinetronic Gen II level problem
Started By
Jon Myers
, Jul 25 2013 09:50 AM
5 replies to this topic
#2
Eric Fletcher S.O.C.
-
- Sustaining Members
-
- 2922 posts
Advanced Member
- LA, Ca
Posted 25 July 2013 - 10:11 AM
Turn off the level display, the bounce back and Roth is because you don't have a valid level input
#3
Michael Hauer
-
- Sustaining Members
-
- 94 posts
Advanced Member
Posted 25 July 2013 - 11:14 AM
Has anyone heard word on when the sensor will be available?
#4
Alec Jarnagin SOC
-
- Moderators
-
- 1811 posts
Advanced Member
- New York City, USA
Posted 25 July 2013 - 12:20 PM
Jon,
The level controls are built into the monitor which is why you see them now, but the sensor will be an external box so you can place it by the center post. That box is still not ready yet which means the level won't work yet. Turn it off for the time being.
The level controls are built into the monitor which is why you see them now, but the sensor will be an external box so you can place it by the center post. That box is still not ready yet which means the level won't work yet. Turn it off for the time being.
#5
Jon Myers
-
- Sustaining Members
-
- 44 posts
Advanced Member
- Los Angeles
Posted 25 July 2013 - 03:32 PM
Thank you guys for your quick and accurate responses!!!! That is exactly the problem.
Jon
Jon
#6
Rob Vuona SOC
-
- Sustaining Members
-
- 1144 posts
Advanced Member
- Los Angeles
Posted 25 July 2013 - 07:04 PM
Jon. You bought a cinetronic.?
