Jump to content


Help with my Artemis tally system and transvideo cinemonitor HD

  • Please log in to reply
1 reply to this topic

#1 Jorge Prieto

Jorge Prieto


  • Sustaining Members
  • 23 posts
  • Madrid ,spain

Posted 12 May 2017 - 06:00 PM

Hello everyone
I have a problem with the configured my Artemis tally system and my Transvideo HD 6 "X-sbl monitor.
I use a Artemis Cine HD PRO with the original tally Arri system.
I recently bought the cable to have the tally through the J002 connector of my transvideo on the screen.
When I use my Tally Artemis Leds system it works perfectly but when I connect the cable that goes to the transvideo J002 the tally light of the screen and the upper tally Leds remain lit continuously even with the camera off.
I think I'm doing something wrong in the configuration of my monitor.
If someone uses this system and can help me.
Thanks in advance
a greeting
  • 1

#2 Alan Rencher

Alan Rencher

    Advanced Member

  • Sustaining Members
  • 1098 posts
  • Los Angeles

Posted 18 May 2017 - 12:45 AM

Tally activation can be set to either "high" or "low" in the Transvideo monitor's menu. You might try switching from one to the other to see if that fixes the issue. The process is described in the user manual.

  • 0

The Moses Pole - Steadicam Monopod

rebotnix Technologies

Media Blackout - Custom Cables and AKS

Wireless Video Systems

Varizoom Follow Focus

Paralinx LLC

PLC - Bartech

Boland Communications

Ritter Battery

PLC Electronics Solutions

Betz Tools for Stabilizers


GPI Pro Systems

Omnishot Systems

Engineered Cinema Solutions